Cisco Aironet 2600 Series Access Points - 1

Cisco Aironet 2600 Series Access Points

Liên hệ

(Giá đã bao gồm VAT)

    Part Number

    AIR-SAP2602I-E-K9

    AIR-SAP2602E-E-K9

    AIR-CAP2602I-E-K9

    AIR-CAP2602E-E-K9

    Danh mục:

    YÊN TÂM MUA HÀNG

    Sản phẩm chính hãng 100%

    Trả bảo hành tận nơi sử dụng

    Giao hàng miễn phí

    Lỗi là đổi mới trong 7 ngày

    Thanh toán an toàn. Chuyển khoản hoặc COD

    Bảo hành tận nơi cho doanh nghiệp

    Cài đặt miễn phí phần mềm bản quyền

    Cài đặt lại miễn trí trọn đời cho máy đã mua tại đây

    CO-CQ đầy đủ theo yêu cầu.

    Sản phẩm tương tự

    Dell Networking,Transceiver,SFP,1000BASE-LX,1310nm Wavelength,10km Reach – Kit (407-BBOO / 42DEN407-BBOO)

    0 out of 5
    Liên hệ

    Cisco ASA 5500-X Series Next-Generation Firewalls

    0 out of 5
    Liên hệ

    Cisco ASA 5500 Series Adaptive Security Appliance

    0 out of 5
    Liên hệ

    Cisco Aironet 2500 Series Wireless Controller

    0 out of 5
    Liên hệ

    Dell Networking, Transceiver, SFP+, 10GbE, LR, 1310nm Wavelength, 10km Reach – Kit (407-BBOP / 42DEN407-BBOP)

    0 out of 5
    Liên hệ

    RPS720 External Power Supply (450-ADEZ / 42DEN450-ADEZ)

    0 out of 5
    Liên hệ

    Dell Networking, Transceiver, SFP, 1000BASE-SX, 850nm Wavelength, 550m Reach – Kit (407-BBOR / 42DEN407-BBOR)

    0 out of 5
    Liên hệ

    Dell Networking, Transceiver, SFP+, 10GbE, SR, 850nm Wavelength, 300m Reach Kit (407-BBOU / 42DEN407-BBOU)

    0 out of 5
    Liên hệ

    Dell Networking Aerohive AP130 (210-AOBV)

    0 out of 5
    Liên hệ

    Dell Networking Aerohive AP230 (210-AOCS)

    0 out of 5
    Liên hệ

    Thông số kỹ thuật

    Supported Wireless LAN Controllers● Cisco 2500 Series, Cisco Wireless LAN Controller Module (WLCM) on Cisco Services Ready Engine (SRE) for Integrated Services Router Generation 2 (ISR G2), Cisco Wireless Services Module 2 (WiSM2), Cisco 5500 Series, Cisco Flex 7500 Series
    802.11n Version 2.0 (and Related) Capabilities● 3x4 multiple-input multiple-output (MIMO) with three spatial streams
    ● Maximal ratio combining (MRC)
    ● 802.11n and 802.11a/g beamforming
    ● 20- and 40-MHz channels
    ● PHY data rates up to 450 Mbps (40-MHz with 5 GHz)
    ● Packet aggregation: Aggregated MAC Protocol Data Unit (A-MPDU) (Tx/Rx), Aggregated MAC Protocol Service Unit (A-MSDU) (Tx/Rx)
    ● 802.11 dynamic frequency selection (DFS)
    ● Cyclic shift diversity (CSD) support
    Data Rates Supported802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
    802.11bg: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
    802.11n data rates (2.4 GHz[1] and 5 GHz):
    Integrated Antenna● 2.4 GHz, Gain 4 dBi, internal omnidirectional, horizontal beamwidth 360°
    ● 5 GHz, Gain 4 dBi, internal omnidirectional, horizontal beamwidth 360°
    External Antenna (SoldSeparately)● Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
    ● Cisco offers the industry's broadest selection of 802.11n antennasdelivering optimal coverage for a variety of deployment scenarios
    Interfaces● 10/100/1000BASE-T autosensing (RJ-45)
    ● Management console port (RJ-45)
    Indicators● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
    Dimensions
    (W x L x H)    		● Access point (without mounting bracket): 8.69x8.69x2.11in. (22.1x22.1x5.4)
    Weight● 2.3 lbs (1.04 kg) (2.7 lbs for external)
    EnvironmentalCisco Aironet 2600i
    ● Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)
    ● Nonoperating (storage) Altitude Test 25˚C, 15,000 ft.
    ● Operating temperature: 32 to 104°F (0 to 40°C)
    ● Operating humidity: 10 to 90% percent (noncondensing)
    ● Operating Altitude Test: 40˚C, 9843 ft.
    Cisco Aironet 2600e
    ● Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)
    ● Nonoperating (storage) Altitude Test: 25˚C, 15,000 ft.
    ● Operating temperature: -4 to 131°F (-20 to 55°C)
    ● Operating humidity: 10 to 90 % (noncondensing)
    ● Operating Altitude Test: 40˚C, 9843 ft.
    System Memory● 256 MB DRAM
    ● 32 MB flash
    Input Power Requirements● AP2600: 44 to 57 VDC
    ● Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
    Powering Options● 802.3af Ethernet Switch
    ● Cisco AP2600 Power Injectors (AIR-PWRINJ4=)
    ● Cisco AP2600 Local Power Supply (AIR-PWR-B=)
    Power Draw● AP2600: 12.95W
    Note: When deployed using Power over Ethernet (PoE), the power drawn from the power sourcing equipment will be higher by some amount depending on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power draw (access point + cabling) to 15.4W.