Dell PowerVault MD3060e Dense Enclosure - 1

Dell PowerVault MD3060e Dense Enclosure

Liên hệ

(Giá đã bao gồm VAT)

    A 60-drive expansion enclosure specifically designed for the MD3 dense array series, the MD3060e dense enclosure is an eBOD (expansion bunch of disks), which operate in the same fashion as a JBOD (just a bunch of disks). There are two enclosure management modules (EMM) that allow for management of the expansion drives via the MD3 Dense Array controllers.

    • Up to 2 expansion enclosures can be daisy chained to an MD3 Series array
    • Options for mix and match of 3.5", 2.5", SED or SSD hard drives
    • Add 2 MD3060e enclosures (max) for up to 180 drives in just 12U, providing up to 1.8PB of raw capacity
    • Dual EMM controller option only, using the enclosure management modules
    Danh mục:

    YÊN TÂM MUA HÀNG

    Sản phẩm chính hãng 100%

    Trả bảo hành tận nơi sử dụng

    Giao hàng miễn phí

    Lỗi là đổi mới trong 7 ngày

    Thanh toán an toàn. Chuyển khoản hoặc COD

    Bảo hành tận nơi cho doanh nghiệp

    Cài đặt miễn phí phần mềm bản quyền

    Cài đặt lại miễn trí trọn đời cho máy đã mua tại đây

    CO-CQ đầy đủ theo yêu cầu.

    Sản phẩm tương tự

    Dell PowerVault MD3420 SAS

    0 out of 5
    Liên hệ

    Dell PowerVault MD1200 DAS

    0 out of 5
    Liên hệ

    Dell PowerVault MD3400 SAS

    0 out of 5
    Liên hệ

    Dell PowerVault MD3460 SAS

    0 out of 5
    Liên hệ

    Dell PowerVault MD1220 DAS

    0 out of 5
    Liên hệ

    Dell PowerVault MD1420 DAS

    0 out of 5
    Liên hệ

    Dell PowerVault MD1400 DAS

    0 out of 5
    Liên hệ

    Thông số kỹ thuật

    Software
    		OS Support 
    Microsoft® Windows Server® 2012 R2, 
    Red Hat® Enterprise Linux® 6.5, 
    Ubuntu® 12.04 LTS, and Debian 7.4
    Nexenta™
    Storage
    		Drives
    60
    Controllers
    Dual Enclosure Management Modules (EMMs)
    HBA 
    Requires a two port host bus adapter (HBA).
    Scalability
    		Expansion capabilities
    Up to 4 dense enclosures behind a single server (240 HDDs)
    Performance
    		Drive type
    3.5" and 2.5" SAS, NL-SAS, SSD, SED
    Maximum HA host
    2
    Maximum Usable Capacity
    		3.5”drive capacity
    7.2K RPM NL-SAS: 500GB, 1TB, 2TB, 3TB, 4TB1, 6TB, 8TB, 10TB
    SSD: 200GB, 400GB, 800GB (WI); 400GB, 800GB, 1.6TB (MU);
    800GB, 1.6TB (RI) (available with 3.5” HDD carriers)
    2.5”drive capacity
    15K RPM SAS: 146GB1, 300GB1, 600GB1
    10K RPM SAS: 146GB, 300GB1, 600GB1, 900GB1, 1.2TB1, 1.8TB
    7.2K RPM NL-SAS: 500GB1, 1TB1, 2TB
    SSD: 200GB, 400GB, 800GB (WI); 400GB, 800GB, 1.6TB (MU); 800GB, 1.6TB (RI)
    3.5” 10K and 15K HDDs are not supported on the dense model
    Connectivity
    		6Gb SAS
    Server Compatibility
    		Dell PowerEdge R630, R730 and the R730xd servers
    Chassis
    		Form factor
    4U rack enclosure
    Physical dimensions 
    (height x width x depth)177.8mm (7.0”) x 482.6mm (19.0”) x 825.5mm (32.5”)
    Maximum weight 
    105.20 kg (232.0 lb)
    Power
    		AC: 1755W
    Management
    		Server controller dependent
    Environmental
    		Heat dissipation (max) 
    5988 BTU/hr
    Voltage 
    220V AC, auto ranging
    Frequency range 50/60Hz 
    Temperature 
    Operating: 10° to 35°C (50° to 95°F) with a maximum temperature gradation of 10°C per hour 
    Relative humidity 
    Operating: 10% to 80% (non-condensing) with a maximum humidity gradation of 10% per hour 
    Altitude 
    Operating: -30.5m to 3000m (-100 ft to 9,840 ft)
    NOTE: For altitudes above 2950 ft, the maximum operating temperature is derated 1.8°F/1000 ft.