Chưa có bình luận nào
Hotline: 0911 002286
Mua hàng - Góp ý - Bảo hành
Liên hệ
Sản phẩm chính hãng 100%
Trả bảo hành tận nơi sử dụng
Giao hàng miễn phí
Lỗi là đổi mới trong 7 ngày
Thanh toán an toàn. Chuyển khoản hoặc COD
Bảo hành tận nơi cho doanh nghiệp
Cài đặt miễn phí phần mềm bản quyền
Cài đặt lại miễn trí trọn đời cho máy đã mua tại đây
CO-CQ đầy đủ theo yêu cầu.
Model | RG-AP840-I | |
Hardware specifications | ||
Radio | Dual-radio dual-band(2.4G+5G):2.4G 2×2 MIMO + 5G 4×4 MIMO | |
Protocol | Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac | |
Operating Bands | 802.11b/g/n: 2.4G ~ 2.483GHz 802.11a/n/ac/ax: 5.150 ~ 5.350GHz, 5.47 ~ 5.725GHz, 5.725 ~ 5.850GHz (vary depending on different countries) | |
Spatial Streams | Up to 6: 2×2:2 in 2.4GHz, 4×4:4 in 5GHz | |
Max Throughput | Maximum throughput of 2.4G: 400Mbps Maximum throughput of 5G: 4.8Gbps Maximum throughput per AP: 5.2Gbps | |
Modulation | OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps DSSS: DBPSK@1Mbps,D QPSK@2Mbps, and CCK@5.5/11Mbps MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM OFDMA (up to 1024-QAM) | |
Antenna | Integrated antenna design | |
Antenna Gain | 2.4G: 3dBi 5G: 3dBi | |
Service Ports | 3 10/100/1000M Ethernet ports (The LAN1 Port supports PoE in, LAN3 Port supports LAN & IoT module expansion with PoE out) | |
Management Port | 1 console port | |
USB | 1 USB 2.0 port | |
IoT Capability | BLE | |
Reset Button | Support | |
Anti-theft Lock | Support | |
LED Indicator | 1 LED indicator (Supports red, green, blue, orange and flashing mode, which indicates device access. The indicator can be switched off to silent mode.) | |
Transmit Power | ≤100mw (20dBm) (vary depending on different countries) | |
Adjustable Power | 1dBm | |
Power Supply | Local power supply (DC 48V/1A) (Power adapters are sold separately) PoE+ (802.3at) PoE (802.3af) – Not recommended: 5G radio is degraded to 2x2 MIMO, and the PoE out of the LAN3/ IoT port is disabled | |
Power Consumption | <25.4W | |
Physical Specifications | ||
Temperature | Operating Temperature: -10°C to 50°C | |
Storage Temperature: -40°C to 70°C | ||
Humidity | Operating Humidity: 5% to 95% (non-condensing) | |
Storage Humidity: 5% to 95% (non-condensing) | ||
Installation Mode | Ceiling/wall-mountable | |
Dimensions | 220 × 220 x 48.85 mm (W x D x H) | |
Weight | 1.30kg | |
IP Rating | IP41 | |
Software Specifications | ||
WLAN | Maximum clients per AP | 1024 |
BSSID capacity | Up to 32 | |
SSID hiding | Support | |
5G Priority (Band Steering) | Support | |
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID | Support | |
Remote Intelligent Perception Technology (RIPT) | Support | |
Intelligent device recognition technology | Support | |
Intelligent load balancing based on the number of users or traffic | Support | |
STA control | SSID/radio-based | |
Bandwidth control | STA/SSID/AP-based bandwidth control | |
Data encryption | WPA (TKIP), WPA-PSK, WPA2 (AES), WPA3, WEP (64/128 bits) | |
PSK and web authentication | Support | |
PPSK authentication (For Employee) | Support (require wireless controller) | |
802.1x authentication | Support | |
PEAP authentication | Support | |
Data frame filtering | Whitelist, static/dynamic blacklist | |
User isolation | Support | |
Rogue AP detection and countermeasure | Support | |
Dynamic ACL assignment | Support | |
RADIUS | Support | |
CPU Protection Policy (CPP) | Support | |
Network Foundation Protection Policy (NFPP) | Support | |
IP | IPv4 and IPv6 address | Support |
Multicast routing | Multicast to unicast conversion | |
DHCP service | DHCP Snooping, Option 82, Server, Client | |
Management and Maintenance | Supported wireless LAN controllers | Ruijie WS Series Wireless Controller Ruijie MACC-Base Software Controller Ruijie Cloud (Public Cloud) |
Management protocol | Telnet, SSH, TFTP, Web | |
Wireless Intelligent AI Optimization Service (WIS) | Support | |
SNMP | SNMPV1,V2c,V3 | |
Syslog / Debug | Support | |
FAT/FIT/MACC mode switching | Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management |
Chưa có bình luận nào
Đánh giá Bộ phát sóng Wifi ốp trần Ruijie RG-AP840-I
Chưa có đánh giá nào.